Complete valve rebuild kit with oring and seal lubricant for replacing a softener piston, brine piston, seals and spacers for the 5600 softener control valve. Note that the replacement piston assembly is GREY and not GREEN however functions exactly the same way! This complete valve rebuild kit includes : ► 1x Main piston assembly (part # 60102-00) ► 1x Seal and spacer kit (part # 60125) (contains 5 seals and 4 spacers) ► 1x Brine piston assembly (part # 60032) ► 1x Brine valve lower seal (part # 13302) ► 1x 111 lubricant and sealant (2oz / 6g pouch) ✪ With the included lubricant and sealant, you don't need to purchase a large tube when you only need a very little amount. Use sparingly as you only need a super fine film. If you use too much it can clog injectors or water paths. Don't use sealants not intended for water treatment systems as they may dry out the seals and orings causing s and leaks in the future. ✪ If you are changing any vale parts, you should also change the seals as they can get wear grooves from damaged parts. This kit includes all the seals and pistons to rebuild a Fleck style 5600 water softener control valve. Complete with additional lubricant and sealant for any and all orings. ✪ For information on how to repair your 5600 control valve, please find how-to videos on YouTube.